OBH Nordica Tower fan model 1385
Before use
Before first use, read the instruction manual carefully and save it for future
use. Remove the cable tie if any, and unravel the cord set completely.
Assembly
Unscrew and remove the 4 screws that are attached under the fan (by the
cord outlet).
Put together the 2 parts that forms the foot. The 6 plastic pins in one of the
halfs are to be fitted into the holes in the other half of the foot. Tighten the
foot by the 2 included screws at the end of each side.
Thread the plug and cord through the half-moon shaped hole in the foot
and fit the foot onto the bottom part of the fan. The small point that’s stick-
ing out on the fan corresponds to the bulge in the foot. Tighten by the 4
screws.
Thread the cord via the opening under the foot.
Parts
1. Dust-lid
2. Control panel
3. LCD display
4. Fan
5. Housing
6. Foot
7. Cord with plug
Use the grip handle at the back side of
the fan when moving the fan and make
sure it’s unplugged from mains supply.
23.
Summary of Contents for 1385
Page 1: ...HI TECH TOWER FAN Model 1385 ...
Page 28: ...SE PC 1385 1107 ...