30
OBH Nordica Steam Iron Racing 300i SS, Racing 300i RS,
Racing 300i TS
Before use
Before you use the steam iron for the first time, please read the instruction manual carefully
and save it for future use.
General description
M
L
J
I
G
K
H
F
E
D
C
B
A
A. ”Soft touch” grip
B. Burst of steam button
C. Spray button
D. Steam selector (can be turned
to the right and to the left,
respectively, for big or small
amount of steam)
E. Water filling inlet
F. Spray nozzle
G. Water tank (300 ml)
H. Soleplate of stainless steel with button groove
(OBH Nordica 2100).
Ceramic coated soleplate and with button groove (OBH Nordica 2105 & 2108)
I. Temperature control
J. Thermostat light
K. Self-clean button
L. Heel ( (resting)
M. Core
Wipe the soleplate with a damp cloth to remove any residue before use. Fill the water tank
with water and empty it to make sure that there are no impurities left in the water tank. Empty
the water tank by opening the water filling inlet and turn the iron upside down over a sink to
let the water run out.
How to use the steam iron
Setting of temperature
Always follow the label and ironing instructions on the garment. The label shows an iron and
the number of dots indicates the right temperature. If the iron on the label is crossed, this
means that the garment
cannot
be ironed.
If there is no instruction as to the ironing temperature, start with the lowest possible
temperature and
carefully
make a test. Always start by ironing a part that will not be visible.
In case of mixed kinds of fabrics, such as polyester/cotton, always iron at a temperature
corresponding to polyester – i.e. the lowest temperature. The following table can be used as
a guideline in case of doubt: