29
Use
• Make sure that the appliance is
not
connected to a wall
outlet.
• Place the mixer bowl on an even and stable surface.
• Place the knife blade unit on the metallic spike in the bottom
of the mixer bowl. Note that the knife blades are extremely
sharp.
• Put the ingredients to be mixed in the mixer bowl. It may
ease the process to cut the ingredients in small bites before
you put them in the mixer bowl. Never exceed the maximum
level (MAX) as marked on the mixer bowl.
Note!
Do not
activate the appliance when the mixer bowl is empty.
• Do not add boiling liquids in the mixer bowl.
• Mount the lid by inserting the dents of the lid in the grooves
inside the mixer bowl. Make sure that the lid engages with a
click. Note that you cannot activate the appliance if the lid is
not positioned correctly.
• Position the motor part on the bowl and make sure that the
dents of the lid fit the grooves on the underside of the motor
unit.
• Plug to a wall outlet and start the mixing process by pressing
the on/off button on the motor unit. When you release the
on/off button, the mixing will stop. Note that the maximum
working cycle is 1 minute, after which the motor should rest
for at least 5 minutes before the appliance is turned on again.
• When the mixing is done, unplug from the wall outlet
before
you remove the motor unit.
Warning! The knife blades will continue rotating for a
while after the release of the on/off button. Wait until the
knife blades have stopped completely before lifting off the
motor part.
6719_IDV_1112.indd 29
2012-11-30 14:21:10
