26
How to use the mini food processor
The mini food processor can be used for chopping, grating and carving food.
The motor of the food processor drives the cutting blades at high speed to ensure a good
and homogeneous result. Consequently, it is important always to place the appliance on an
even and dry surface before use.
Make sure that the bowl and lid are correctly positioned on the motor part. If not, the mini
food processor cannot start. To position the bowl correctly, put it on the motor part and turn it
counter-clockwise until the bowl is locked on the motor part. Put the lid on the bowl and turn
counter-clockwise until the plastic rod on the outside face of the lid is positioned right above
the grip of the bowl. The lid has been correctly positioned when you hear a click.
Please note that the appliance cannot start until the bowl and the lid have both been correctly
mounted.
Always
be sure that there are ingredients in the bowl before starting the mini food processor.
1
2
7
8
3
4
5
6
9
OBH Nordica Mini food processor
Before use
Before you use the mini food processor for the first time, please read the instruction manual
carefully and save it for future use.
Wash all removable parts in warm water with a washing-up liquid before use.
Note:
The knife
at the bottom of the bowl is extremely sharp and should be handled with extreme care.
Parts of the appliance
1. Motor part
2. Bowl
3. Knife
4. Lid
5. On/Off button
6. Holder for grating and carving disc
7. Grating and carving disc
8. Lid with hopper for use
when carving and grating
9. Pusher
6723_IM_240111.indd 26
17-02-2011 14:57:53
