27
Plug the appliance. Turn on the appliance by pressing the on/off button. Keep the on/off
button down to make the mini food processor work. As soon as the button is released, the
mini food processor will stop.
The mini food processor is for small volume preparation tasks only. We recommend that you
start by pressing the button at short intervals and then let the appliance work continuously
until you have obtained the wanted degree of fineness. Please note that the mini food
processor must only work continuously for max one minute at the time, after which it should
cool for 3 minutes before being used again.
Unplug the appliance after use.
Mounting of accessories
All accessories shall be mounted on the driving shaft in the centre of the bowl. The driving
shaft is already mounted on the motor part. Be sure to position the bowl correctly.
Knife (3)
Please note that the knife is extremely sharp, so please do not touch the blades! Mount the
knife in the bowl on the driving shaft and mount the lid as previously described. Add the
ingredients to be chopped and press the on/off button. The total operation time must not
exceed 1 minute.
IMPORTANT!
In order to prevent damage of the bearings, the knife and the container, the following
ingredients should not be used in the mini food processor: Cereals, rice, frozen raw
materials, horseradish, spices and coffee beans. Any damage caused by adding
such ingredients is not covered by the warranty!
After use, remove the knife from the driving shaft by lifting the knife holder. Be careful not
to cut your fingers on the knife when removing it. Remove the bowl from the motor part by
turning it clockwise.
IMPORTANT!
The knife is very sharp and should be handled with care. Never take the lid off the
container and never demount the lid before the knife has come to a complete stop!
6723_IM_240111.indd 27
17-02-2011 14:57:53
