11.
Be careful when handling the appliance, as
the blade is extremely sharp!
Do not touch the
blade during use. Be careful that neither fingers
nor tools touch the blade! Always unplug before
cleaning.
12. The blender must not be used for more than
3 minutes at a time. Then leave the blender to
rest for 5 minutes before restarting it (to avoid
overheating).
13. In order to avoid hazard due to inadvertent
resetting of the thermal cutout, this appliance
must not be supplied through an external
switching device, such as a timer, or connected to
a circuit that is regulary switched on and off by the
utility.
14. Always check the appliance, the cord and the
switch before use. If the cord is damaged, it must
be replaced by the manufacturer, an authorized
service agent or a similarly qualified person in
order to avoid a hazard.
15. Extra protection can be obtained by installation of
a residual current device of 30 mA. Check with
your installer.
16. The appliance is for domestic use only.
17. If the appliance is used for other purposes than
intended, or is not handled in accordance with
the instruction manual, the full responsibility for
any consequences will rest with the user. Any
damages as a consequence of the above to the
product are not covered by the warranty.
Before use
Clean all the parts as described under “Cleaning and maintenance”. The blade
at the base of the jug is very sharp and must be handled with the utmost care.
The blade unit (6) can be removed and washed separately. Use a damp cloth
to clean the motor unit.
54
