33
13. For additional protection the installation of a residual
current device (RCD) with a rated residual operating
current not exceeding 30 mA is recommended. Ask your
installer for advice.
14. The appliance is for domestic use only.
15. If the appliance is used for other purposes than intended,
or is it not handled in accordance with the instruction
manual, the full responsibility for any consequences will
rest with the user. Any damages to the product or other
things are not covered by the warranty.
Before use
Wash all removable parts in warm water with a washing-up liquid before use.
NOTE:
The blades is extremely sharp and should be handled with extreme
care.
Parts of the appliance
(see image page 3)
1. Motor section
2. Drive shaft
3. Bowl
4. Lid
5. Feed tube
6. Pusher
7. Power switch/speed control
8. Double-sided grating/cutting disc
9. Blade
How to use the food processor
The food processor can be used to blend, chop, grate, carve and mix food.
The motor of the food processor drives the cutting blades at high speed to
ensure a good and homogeneous result. Consequently, it is important always to
place the appliance on an even and dry surface before use.
Make sure that the bowl and lid are correctly positioned on the motor part. If
not, the food processor cannot start.
To position the bowl correctly, insert the drive shaft into the hole in the motor
section. Put the bowl on the motor part and turn the bowl handle anticlockwise
so that the handle points to the right once the bowl is correctly fitted. Mount
the wanted accessory to the drive shaft (see section “Mounting of
accessories”). Put the lid on the bowl. The plastic rod on the outer side of the
6792_JG_1016.indd 33
2016-11-23 09:09:17
