34
lid shall be to the right of the grip of the bowl. Turn the lid clockwise. The lid
has been correctly positioned when you hear a click. Please note that the
appliance cannot be started until the bowl and the lid have been correctly
positioned.
Always be sure that there are ingredients in the bowl before starting the food
processor.
The maximum bowl capacity is 1,8 litre (liquid ingredients 1 l), but when
preparing certain foods, the capacity is less – see the section “Quantities and
indicative speed”. Use the measurement scale on the bowl as an indication.
Quantities and indicative cooking
times
Accessory
To be used for:
Max. capacity
Setting
Knife
Chopping e.g.:
Meat
Approx. 300 g
Pulse
(moment) or 2
Slicing disc
Cutting e.g.
vegetables, cheese, potatoes,
slicing of fruit
1 or 2
Grating disc
Grating, e.g. vegetables,
cheese, potatoes, chocolate,
fruit
1 or 2
When the bowl and the lid have been correctly positioned, the food processor
is ready for use. Check that the speed selector is at position ”0” and then plug
the appliance in the main supply. Turn the speed selector to the wanted speed
for a few seconds. Then turn it back to “0” and see whether you get the result
you want. The process is very fast, so do not work too long at a time. Take off
the lid by grabbing the hopper and turn counter-clockwise to remove the lid.
Use the function “Pulse” (moment) for short intervals. Keep the contact in that
position to make the food processor work. As soon as the button is released,
the food processor will stop.
Mounting of accessories
All accessories must be attached to the drive shaft positioned in the centre of
the motor section Then place the bowl over the drive shaft so that it sticks up
through the hole in the bowl. Make sure that the bowl is correctly positioned.
Knife (steel) (9)
Please note that the knife is extremely sharp, so please do not touch the
blades! Attach the blade to the drive shaft in the centre of the bowl. Put on the
lid as previously described. Set the speed selector at ”2”. The total operation
time should not exceed 1 minute.
6792_JG_1016.indd 34
2016-11-23 09:09:17
