OBH Nordica Hairdryer 5102
Read the manual and keep it in a safe place.
The hairdryer can be adjusted to 120/230V and is therefore idealistic when you
travel. Remember to set the desired voltage before you plug in the appliance. You
switch voltage by turning the “screw” which is placed on the side of the handle.
Wash, towel dry and brush your hair. If you like you can add some mousse or hair
gel and then style your hair with the hairdryer.
Use
Plug in the appliance and select the switch position for the desired airflow/heat
setting.
Switch
0=Off
1= 600 W low heat/speed
2= 1200 W high heat/speed
Automatic overheating protection device
The hairdryer has an automatic overheating protection device, overheating can be
caused by a blocked air intake. If the hairdryer overheats, it will automatically shut
off. Turn the setting to 0 and wait a few minutes before restarting it.
Maintenance and cleaning
•
Before cleaning, disconnect the appliance from the mains.
•
Never immerse the appliance or it´s cord in water or any other liquid.
•
You can clean your appliance with a slightly damp cloth and dry it with a dry
cloth after.
Safety instructions
1. Read through the instruction manual carefully before use and save it for later.
2. Only connect the appliance to 120/230 Volt A.C and only use the appliance for
its intentional purpose.
3. Unplug the appliance from the mains supply immediately after use.
4. Electronic appliances are not toys and should be kept away from children.
Children do not always estimate and predict possible
risks.
5. Make sure that the cord does not hang down from the table.
6. Only use the appliance under sight.
15
5102 Fly & Dry m trashbin.indd 15
2005-10-14 11:26:16
