4. Put the lid on the juice container (fig. 3) and position the locking lever above
the lid (fig. 4) until it engages with a click, which indicates that the safety
switch is activated.
5. Always check filter and plastic parts for cracks or other damages. In order to
avoid a hazard, a damaged grater should not be used.
6. Mount the fruit pulp container on the appliance as shown in fig. 5. It may be
necessary to empty the fruit pulp container during the process, and in such
case, be sure to switch off the appliance before removing the container from
the appliance. Always mount the fruit pulp container again before using the
appliance.
7. Position the pusher in the chute by inserting the grooves on the pusher with
the plastic pin into the inner side of the chute (fig. 6).
8. Position a glass or the delivered jug under the chute.
How to use the juice extractor
Always check that the appliance has been correctly mounted before use.
Connect the plug to a socket and set the required speed (1 or 2) by positioning
the switch of the appliance. Consult the following guide to see what speed level
to use in order to obtain the optimum of the raw materials:
30
MB
6749_IDV_UVN_0413.indd 30
2013-04-25 16:15:08
