37
1
2
4
3
5
6
7
9
10
11
12
13
8
How to use the food processor
The food processor can be used to blend, chop, grate, carve and mix food.
The motor of the food processor drives the cutting blades at high speed to ensure
a good and homogeneous result. Consequently, it is important always to place
the appliance on an even and dry surface before use.
Make sure that the bowl and lid are correctly positioned on the motor part. If not,
the food processor cannot start. To position the bowl correctly, mount the driving
shaft on the motor part. Put the bowl on the motor part and turn the handle of
the bowl clockwise. You will hear a click when the bowl has been properly
engaged. Mount the wanted accessory (see section
“Mounting of accessories”
).
Put the lid on the bowl. The plastic rod on the outer side of the lid shall be to the
right of the grip of the bowl. Turn the lid clockwise. The lid has been correctly
positioned when you hear a click. Please note that the appliance cannot be started
until the bowl and the lid have been correctly positioned.
Always be sure that there are ingredients in the bowl before starting the food
processor.
6798_99 IDV_UVN_310713.indd 37
8/14/2013 11:38:30 PM
