41
How to disassemble the appliance
1. Remove the pusher. Turn the lid counter-clockwise, lift it and take it off.
2. Remove the knife, the whisk or the disc.
3. Remove the accessory holder.
4. Turn the bowl counter-clockwise to remove it from the motor part.
5. Remove the driving shaft.
Cleaning and maintenance
Always unplug the appliance before cleaning. The motor part should never be
immersed in water or other liquids. Use a damp cloth for cleaning the motor part.
All plastic parts can be cleaned in a dishwashing machine. Do not use scouring
powder or other aggressive detergents as these may scratch or dull the surface.
ATTENTION!
The knife and the cutting blades of the discs are very sharp. So be careful. Rinse
the knives and the discs in warm water with a washing-up liquid and wipe
carefully before storing the appliance.
Remove any congealed remains after a short soaking with a mild detergent and
a soft brush.
IMPORTANT: NEVER IMMERSE THE MOTOR PART INTO ANY KIND OF
LIQuID!
Trouble shooting
The appliance does not work:
Check that the food processor has been correctly
assembled
The appliance suddenly stops:
Note:
The preparation bowl may loosen if treated hard
The motor is running, but the
ingredients do not move:
Check that the driving shaft has been correctly
mounted
Disposal of the appliance
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment
marked with the symbol indicating separate collection of such equipment
must be returned to a municipal waste collection point.
Warranty
Claims according to current law. Cash receipt with purchase date shall be enclosed
with any claims. When raising a claim the appliance must be returned to the store
of purchase.
6798_99 IDV_UVN_310713.indd 41
8/14/2013 11:38:36 PM
