25
Rolling massage (ROLLING)
Rolling is like two hands or thumbs working up and down along your spine. Choose from 3
preset programs where the Rolling massage travels up and down in a specific area of the back.
FULL = whole back, UPPER = upper back and LOWER = lower back. To select a program,
simply press the button and the L.E.D. will illuminate. To deselect, press the button again or
press another button.
Adjustment of width (WIDTH)
While the unit is in Rolling massage, one can adjust the distance between the massage heads.
This adjustment changes the area that is massaged along your spine. With each press, the
massage heads will move to the next available position.
CAUTION!
To avoid pinching do not lean on the dual massage mechanism in the cushion when adjusting
your body position. Do not jam or force any part of your body in the moving massage
mechanism.
The massage cushion Shiatsu and Rolling massage is only to be used at the back.
If the fabric or material covering the massage mechanism becomes torn or damaged,
discontinue use.
Only gentle force should be exerted against the unit in order to eliminate any/all
risk of injury.
Soften the massage force by placing a towel between yourself and the unit.
Important!
The cushion will auto shut off after 15 minutes. This because the massage
cushion should not be used for more than 15 minutes at a time. After a 15 minutes treatment
we recommend a rest for at least 15 minutes
Note!
The moving dual massage mechanism
always “parks” or finishes in its lowest position. It will continue to this position after the power
has been turned off.
Cleaning and maintenance
Place the massager in its box or in a safe dry place. Avoid contact with sharp edges or pointed
object that might cut or puncture the fabric surface. To avoid breakage do not wrap the power
cord around the unit. Pull the plug before cleaning. The massager can be cleaned with a damp
clot. After dry with a towel. Water or other liquids can not come in contact with the massager.
Never use any kind of detergent when cleaning.
Safety instructions
1. Read the instruction manual carefully before use, and save it for future use.
2. Plug the appliance to a household outlet of 230V only, and use the appliance only for the
intended use.
3. Always unplug the appliance from the mains supply when disorder is experienced, when
not in use, when parts are applied or removed from the appliance and before cleaning
and maintenance.
4. The appliance must not be immersed into water or other liquids.
6076_PC_0308.indd 25
2009-02-23 10:25:40
