56
11. Incorporated anti-scale filter
12. Extra big water tank, 350 ml
13. Heel (resting)
14. Signal lamp
15. Beaker
Remove possible protective film from the soleplate and wipe
the soleplate with a damp cloth to remove any residue from the
production. Fill water in the tank and empty it again to be sure
that there are no impurities left in the water tank. Empty the
water tank by opening the lid and turn the iron upside down
over e.g. the kitchen sink to let the water run out.
Use
Setting of temperature
Plug the switch to a wall outlet. The water tank and the signal
lamp will light to indicate that the iron is connected. Set the
temperature by turning the temperature indicator to the setting
you want depending on the fabric to be ironed. When the signal
lamp goes out, the chosen temperature has been reached and
the iron is ready for use.
The following table can be used as a guideline in case of doubt
as to the temperature.
• = MIN SYNTH
Ironing at low temperature. For synthetic fabrics such as e.g.
acrylic, nylon, polyester, velvet etc. Steam ironing is not possible
at low temperatures. Set the steam button at .
•• = SILK
Ironing at medium temperature. To be used for e.g. wool, silk,
etc.
2107_IDV_1112.indd 56
2013-03-25 15:10:56
Summary of Contents for Touring 450i GT
