160
USING THE APPLIANCE
Cooking times for the main foods are given in the section ‘Cooking Guide’.
1. Connect the power supply cord to an electrical socket.
2. Place the food in the bowl.
Note: Never fill the bowl beyond the MAX level mark or exceed the maximum amount indicated in the table (see
into section ‘Cooking Guide’), as this could affect the quality of the end result.
3. Place Turbo Crisp above Turbo Cuisine & Fry’s bowl.
Caution: Do not touch the hot parts of the appliance during use. Only touching the screen and holding the
appliance by the handles are possible.
4. To begin cooking, you can select between the automatic cooking mode or choose the manual settings.
a. If choosing manual settings:
• Adjust the temperature
with the
+
and
buttons on the digital screen. The thermostat varies from 70-200°C.
• Then set the desired cooking time by pressing the
button and adjusting the time with the
+
and
buttons.
The timer can be set for between 0 and 60 minutes.
• Press the Start button to begin cooking with the selected temperature and time settings. Cooking starts. The
remaining cooking time will alternate on the screen display.
b. If choosing automatic cooking mode:
• Press Menu key
on the screen to select the desired cooking mode (these modes are described in detail in the
“Cooking guide” section).
• Confirm the cooking mode by pressing the Start button. This will launch the cooking process.
• Cooking starts. The remaining cooking time will alternate on the on-screen display.
5. Some foods require shaking halfway through the cooking time (see section ‘Cooking Guide’). To shake the food, remove
the appliance from the bowl. To avoid damaging the non-stick coating on the pan, use only wooden or plastic utensils to
stir food. Then put Turbo Crisp back on the bowl and press the Start button
again to restart cooking.
6. Once the cooking time has elapsed, the appliance will make a sound and go down in temperature. Remove the appliance
from the bowl and place it on a heat-resistant surface.
7. Check if the food is ready.
If the food is not ready yet, simply place Turbo Crisp back on the bowl and set the timer for a few extra minutes.
8. When the food is cooked, take out Turbo Crisp.
Caution: Do not turn Turbo Crisp, do not touch the hot grill. Do not turn the bowl, because of any excess hot oil.
After hot air frying, the bowl, Turbo Crisp and the food are very hot. Depending on the type of food cooked in the
bowl, be careful as steam may escape from the bowl.
Note: after 3 minutes of inactivity, the appliance goes into standby and after 30 minutes of inactivity, the appliance will
switch to Sleep mode. Press the button to turn it back on again.
QK7788S0 - IFU - Multicooker - Turbo Cuisine & Fry - 29-06-2022.indd 160
QK7788S0 - IFU - Multicooker - Turbo Cuisine & Fry - 29-06-2022.indd 160
2022-06-29 14:33
2022-06-29 14:33
