68
The transmitter features the following:
A. LED indicator
B. Suspension eye
C. Battery cover
D. Battery compartment
E. TX button
F. Channel button (1, 2, 3)
G. Reset button
Mounting and changing of batteries
IMPORTANT!
When the thermometer is put into use, it is important
to insert the batteries in the receiver before inserting
batteries in the transmitter
The receiver takes 2 AAA 1.5V batteries. Remove the battery
cover on the back of the receiver and insert the batteries in
the battery compartment.
Make sure to position the batteries with the +pole and the –pole as
shown at the inside of the battery compartment. Mount the battery
cover again.
When the batteries have been inserted in the receiver you will
hear 1 short beep. ”--.- °C” will appear at the bottom of the
display to indicate that the receiver is waiting for a signal from
the transmitter.
A
B
C
D
E F G
4830_UL_UVN_100214 002.indd 68
2/14/2014 1:30:53 AM
