76
Temperature alert
The wireless indoor/outdoor thermometer comprises an indoor
and an outdoor temperature alert that sounds if the indoor
temperature or the temperature of the separate transmitter is
above or below a fixed temperature range.
The indoor temperature alert is set as follows:
1. Press and keep the ALERT button (I) down for 3 seconds
until the max temperature limit flashes indicating that the
temperature limit can be set. Use the UP C/F or the DOWN
12/24 button to set the wanted upper temperature limit of the
indoor temperature.
2. Press the ALERT button (I), and the min. temperature limit will
start flashing. Press the UP C/F or the DOWN 12/24 button to
set the wanted lower temperature limit.
3. Press the ALERT button (I) again. The temperature alert has
now been set and
.is displayed. When the upper or the lower
temperature limit is exceeded, a sound signal will be activated
and the temperature alert icon will flash. Deactivate the sound
signal by pressing the ALERT button (I).
If you want to disconnect the temperature alert completely, press
the ALERT button (I), until the temperature alarm icon disappears
from the display.
Set the outdoor temperature alert as follows:
1. Press and keep the ALERT button (I) down for 3 seconds.
2. Press the CHANNEL button to choose the wanted transmitter
(1-3).
3. The maximum temperature limit of the chosen transmitter will
flash to indicate that the temperature limit can be set. Use the
UP C/F or the DOWN 12/24 button to set the wanted upper
temperature limit of the indoor temperature.
4. Press the ALERT button (I), and the minimum temperature limit
of the chosen transmitter will start flashing. Press the UP C/F or
the DOWN 12/24 button to set the wanted lower temperature
limit.
4830_UL_UVN_100214 002.indd 76
2/14/2014 1:30:58 AM
