77
5. Press the ALERT button (I) again. The temperature alert is now
activated and
.is displayed. When the upper or the lower
temperature limit is exceeded, a sound signal will be activated
and the temperature alert icon will flash. Deactivate the sound
signal by pressing the ALERT button (I).
If you want to disconnect the temperature alert completely, press
the ALERT button (I), until the temperature alarm icon disappears
from the display.
Timer
The wireless indoor/outdoor thermometer comprises a timer
function (countdown).
The timer is set as follows:
1. Press the MODE button, until the word TIMER is displayed.
2. Press and keep the SET/AL ON/OFF button down until the
number of hours flashes.
3. The number of hours is now set by means of the UP C/F and the
DOWN 12/24 buttons
4. Press the SET/AL ON/OFF button and the number of minutes
starts to flash.
5. Minutes are set by means of the UP C/F and the DOWN 12/24
buttons
6. Press the SET/AL ON/OFF button again, seconds will flash
and can be set by means of the UP C/F and the DOWN 12/24
buttons.
7. Press the SET/AL ON/OFF button to confirm the setting and
press the SET/AL ON/OFF button again to start the timer.
When the time has elapsed, 0:00 will be displayed and the alarm
will be activated sending out beep sounds. Stop the timer by
pressing one of the buttons on the front of the receiver.
If you want to switch off the timer before the time has elapsed,
press the SET/AL ON/OFF button. Restart the timer by pressing the
SET/AL ON/OFF button, and the timer will continue the countdown.
4830_UL_UVN_100214 002.indd 77
2/14/2014 1:30:58 AM