OBID
®
classic-pro
Installation
ID CPR50.10-E/-RE
FEIG ELECTRONIC GmbH
Page 28 of 31
M90701-4de-ID-B
E
N
G
L
I
S
H
10. Technical Data of the Reader Family ID CPR50.10-E/-RE
Housing for flush-mounting box
Dimensions (W x H x D)
Color
84 mm x 84 mm x 22 mm (3.31" x 3.31" x 0.87")
Corpus: white / Face plate: black
Surface Adapter
Dimensions (W x H x D)
Color
77,7 mm x 77,7 mm x 18,0 mm (3,06" x 3,06" x 0,71")
light grey
Weight
approx. 150 g
Protection class
IP 54
Supply Voltage
alternative:
Power over Ethernet (PoE) IEEE802.3af
external power supply 24V to 48 V DC ±10%
Power consumption
typical 3,2 W - max. 3,8 W
(IEEE802.3af Powered Devices Class: 1)
Cable specification
max. 100 m (300 feet) shielded CAT-5 cable
Temperature range
Operation
Storage
-20 °C to +55 °C
-40 °C to +85 °C
Relative air humidity
95 % (non-condensing)
Antenna
internal (approx. 70 x 70 mm)
Operating frequency
13,56 MHz
RF Transmitting Power
250 mW
2 dB
RF-Interface
ISO14443-A, ISO14443-B, NFC
2
, ISO15693
Supported Transponder
e.g.: mifare
®
classic (mini, 1k, 4k), mifare
®
UltraLight,
mifare
®
DESfire, Smart MX, my-d
TM
proximity, SLE44R35S,
SLE66CL, ST19XR34, RF360, I
Code SLI, Tag-It HFI, my-d
TM
vicintiy, STM LRI512, etc.
LED
blue, green, red (configurable function)
Buzzer
integrated
Connector
LSA terminal
Relay (
ID CPR50.10-RE only)
1 x normally open
(contacts capacity: 24 V AC/DC 1,5 A)
Interface
Ethernet 10BASE-T/100BASE-TX
automatic MDI/MDI-X cross over correction
TCP/IP protocol, IPv4
Factory Settings Ethernet
IP-Adress: 192.168.10.10
Subnet-Mask: 255.255.255.0
Port: 10001
DHCP: off
EEPROM
for configuration parameter (1 million write cycles)
2
NFC: Type 1, Type 2 and Type 4 in NFC card emulation mode
