Copyright 2010-2017 Obihai Technology, Inc.
30
For the meaning of these values, please see the section Digit Maps and Call Routing. Some parameter changes require a
reboot to take effect. Changes from the OBiTALK Configuration will trigger the phone to reboot automatically (but will
wait for any current calls to end first).
Key Ahead
: By pressing the appropriate button sequence on the telephone key pad, you can barge into the next menu
of the IVR or invoke a command without first waiting for the previous announcement to end.
Main Menu
The Main Menu after starting the IVR is a list of operations that can be selected by entering the corresponding 1-digit
option number, as listed below:
Selection
Announcement
What Can You Do?
1
Basic Network Status
Your IP address and DHCP status will be read
back to you.
Press 0 to repeat the information.
2
Advanced Network Status
Your primary & back-up DNS server, primary
& back-up NTP server will be read back to
you.
Press 0 to repeat the information.
3
DHCP Current Value
Your current value will be read back to you
and you will be given the option to change
the value
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
4
IP Address Current Value
Your current value will be read back to you
and you will be given the option to change
the value. If you elect to enter a new value
(static IP address) DHCP will be disabled.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
5
Password Current Value
Your current IVR password value will be read
back to you and you will be given the option
to change the value.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
6
Please Wait (while OBi is checking for
software update)…
This is followed by either:
-
Software Update Available. Press 1 to
update software, OR
-
Software Update Not Available
If an update is available, press 1 to
proceed with the update. The software
update process will start as soon as you
hang up the phone.
Warning: Once the software upgrade
process starts
, the device’s power LED
will blink rapidly. Please make sure the
power and network cable stay
connected to the unit until the process
is complete.
8
Restore Factory Default
Press 1 to confirm device restore to
factory default settings.
Press # to return to device configuration
menu.
Press # # to exit IVR.
