Copyright 2010-2013 Obihai Technology, Inc.
128
like this: {0:ph,ph2} which forks to ring both
PHONE1 and PHONE2. In general you can have up
to 4 destinations is a forking rule. On the other
hand, you must not specify more than one
destination number on the OBi100 and OBi110.
{([1-9]x?*(Mpli)):pp},
{0:ph.ph2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi:200/OBi300:
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
PrimaryLine
By primary line we mean the service that does not
require any access code prefix (such as **1 or **9)
when dialing; it is the default service to be used for
making the call when no explicit access code prefix
is entered. This parameter indicates to the device
which voice service is considered as the primary line
when dialing out via the Auto Attendant. Available
choices are:
SP1 Service (
code = sp1
)
SP2 Service (
code = sp2
)
SP3 Service (code = sp3)
SP4 Service (code = sp4)
OBiTALK Service (
code = pp1
)
PSTN Line (
code=li1
)
1
Trunk Group 1 (code=
tg1
)
The OBi device process the parameter by
substituting of the occurrences of
pli
and
(Mpli)
in
DigitMap and OutboundCallRoute with the
corresponding
code
and
(Mcode)
. For example, if
PrimaryLine = PSTN Line, then all occurrences of
pli
and
(Mpli)
will be substituted internally with
li1
and
(Mli1)
respectively
PSTN Line
AnswerDelay
Period of time in milliseconds that the AA will wait
before answering an incoming call that has been
routed to it
4000
NumberOnNoInput
In the case that the caller does not enter any option
from the top level menu after the menu has been
announced for 3 times, the AA directs the caller to
the number specified in this parameter. If this
number is not specified, the AA simply terminates
the current call.
0
Note: According to the
default DigitMap and
OutboundCallRoute, calling
0 means calling the PHONE
port
UsePIN
Enable the use of PIN to authenticate callers when
No
Summary of Contents for OBi100
