DOC-00260 Rev. A1
7–35
Eden260 User Guide
The
Eden
printer
calibrates
itself
based
on
the
weight
data
you
entered,
and
the
final
wizard
screen
appears.
Figure 7-57:Final Head Replacement screen
Replacing the
UV Lamps
The
UV
lamp
used
for
curing
models
have
a
long,
but
limited,
working
life.
The
Objet
service
engineer
tests
their
effectiveness
during
regular
maintenance
checks,
and
replaces
them,
if
necessary.
If,
for
any
reason,
you
need
to
replace
a
UV
lamp,
follow
these
instructions.
1. Make
sure
the
Eden
printer
is
in
offline
mode.
Figure 7-58:Offline mode (red)
The
button
at
the
bottom
of
the
Eden
computer
interface
should
be
red.
If
not,
click
it
to
switch
the
printer
to
offline
mode.
2. Open
the
cover
of
the
Eden
printer.
After replacing printing heads, check the head alignment (see “Aligning the
Printing Heads” on page 7-20).
WARNING:
Before continuing, make sure that the safety interlock in the
printer cover is not defeated.