DOC-00500 Rev. F
7–31
Eden500V/350V/350 User Guide
13. Pull
the
‐
head
driver
card
out
of
its
socket
so
that
the
head
is
free
(A),
and
remove
it
from
the
bottom
of
the
block
(B).
Figure 7-42: Releasing the print-head driver card to remove the head
14. Make
sure
that
along
with
the
head,
you
remove
the
two
rubber
O
‐
ring
seals.
Figure 7-43: O-ring seals on the print head
Figure 7-44: Making sure the O-rings are not stuck to the print block
Important
: If the seals are not removed with the head, they are probably
stuck to the print block housing. If so, remove them.
