18
19
7. SMARTS
Smart is one of the main features of OBLO Living client application. It allows end users to control
and monitor their home on zone/room level (home, floor, living room, kitchen…).
Smart consists of set of devices of the same type that are available in one zone in user’s smart home.
Currently, there are three smart types available within OBLO Living application:
1.
Lighting smart (requires at least one device that supports lighting service)
2.
Heating smart (requires at least one thermostat)
3.
Sensory smart (requires at least one sensor)
Smarts are active by default after the end user logs into the OBLO Living application.
7.1 ADD NEW SMART
Once a new device is added to the user’s smart home system, the gateway will automatically check
if the corresponding smart could be added to the selected zone also (Illustration 25). For example,
when the new smoke sensor is added and assigned to the kitchen, gateway automatically proposes
sensory smart in the kitchen and all parent zones (floor, home).
Illustration 25 Illustration 26
Smart can be easily added to the selected zone by pressing the button “Add”. Once the smart is
added to the selected zone, its quick control will be displayed on the screen whenever that zone is
active (Illustration 26).
To select a specific zone/location, tap the button
in the upper right corner.
NOTE:
Smarts can be added to the user’s smart home system only when corresponding devices
are assigned to some room/zone in user’s home (in the case when devices are unsorted, smarts
are not available for those devices).
7.2 LIGHTING SMART
Lighting smart allows control of all lighting devices (dimmers, relays, connected bulbs) within the
selected zone. Once lighting smart is added to some room/zone, its quick control will be displayed
in that room/zone (Illustration 27).
There are several options available within quick control:
1.
Turn all lights in selected zone on
2.
Turn all lights in selected zone off
3.
Activate user-defined lighting preset
Illustration 27
Illustration 28
By tapping “See more” in the lower left corner, the user is able to see more options for devices
within selected smart.
By tapping the button , the user is able to:
1.
Configure selected smart
2.
See all devices and their current statuses within selected smart
Configure lighting smart
By using this option, the users are able to define their own presets according to their needs. This
can be done in a few simple steps:
3.
Tap the button
4.
Select the option Play and edit (Illustration 28)
5.
Set the desired status of each device within selected smart
6.
Tap “Done” in the upper right corner
7.
A new dialog box will appear and you should confirm that you want to record selected preset
8.
Tap the button “Back” in the upper left corner
In order to rename your new preset, follow the next steps:
4.
Tap the button and select option Rename
5.
Insert preset name
6.
Tap OK
7.3 HEATING SMART
Heating smart manages heating in the selected zone. Once heating smart is added to some room/
zone, its quick control will be displayed in that room/zone (Illustration 29).
