12
13
4.3.1.2 Add the gateway by scanning QR code
Please follow next steps in order to add the gateway to the user account:
1.
Open the OBLO Living application and log into the user account
2.
From the drawer menu select option “Add new gateway”
3.
Tap the button “QR scan”
4.
In order to scan QR code, you should allow the app to use your camera
5.
Scan QR code that can be found on the back side of the Safety Information card that comes
in a box together with your gateway device
6.
If the gateway has been added to your account, a success message will be displayed
4.3.2 Add the gateway by using web application
Please follow next steps in order to add the gateway to the user account:
1.
Visit
https://cloud.oblo.rs
and log into the user account
2.
Once you have logged in, tap the button ASSIGN GATEWAY (Illustration 14)
Illustration 14
Illustration 15
3.
Enter required gateway information (Illustration 15):
a. Secure ID – is a unique, secret identifier for a gateway. It consists of 16 characters (com-
bination of letters and numbers) and can be found on the back side of the Safety Infor-
mation card that comes in a box together with your gateway device.
b. Serial number – a unique identifier for every gateway device. It consist of 12 characters
(e.g. 7CDD9078CC00) and can be found on bottom of the device
4.
Tap the button NEXT
5.
In the new dialog enter the name of your gateway
6.
In case you would like to use services that use your location (e.g. weather service) add your
gateway’s address
7.
Tap the button SAVE to add the gateway and continue the home configuration process. If the
gateway has been added, a success message will be displayed
4.4 HOME SETUP
The Home Setup section will guide you through a set of steps to create your smart home. To access
this section, please follow next steps:
1.
Login to the account to which the gateway was added
2.
Select Home Setup option from the main menu
After you have accessed Home setup section, you will see following options on the left side of the
screen (Illustration 16):
1.
Manage gateway
2.
Manage layout
3.
Manage devices
4.
Manage smarts
Illustration 16
1.
Manage gateway
Here you can find detailed information about your smart home gateway, such as ZigBee info,
Z-Wave info, Network configuration, etc.
2.
Manage layout
In this section, the user can configure its home layout. By using the options on the left (Illus-
tration 17), you can define floors, rooms and areas in your smart home.
