32 | EN
OBO Bettermann
Mounting
5 4 3
Creating a vertical connection
The RGV adjustable connector is mounted to create vertical connections
of angles of up to 90° for rising or falling sections. The RGV adjustable
connector is used with all cable tray heights. In addition, floor end plates
are mounted to avoid cable damage due to sharp edges. Connectors
and floor end plates are screwed on with FRS M6 truss-head bolts and
combination nuts.
1
2
3
Fig 30:
RGV adjustable connectors and floor end plates
1
SKS hinge screw M8x16 mm
2
Slot
3
Securing screw
Fig 31:
Screwing on the floor end plates
1. Pre-drill unperforated cable trays for the mounting of the floor end
plates.
2. Screw the floor end plates to the ends of the cable trays.
