Mounting instructions, ZSE90 strain relief
EN | 27
Mounting the product
4 8
Mounting identification plates
The strain relief must be labelled with a
KS-ZSE
identification plate. On the
identification plate, the system and the function maintenance classes are
stated. In addition, the executing company, the certificate number of the
surveyor's report and the year of installation must be entered.
Mounting on the wall
1. Clearly fill out the identification plate with permanent marker.
2. Mount the identification plate on the wall next to the strain relief.
Mounting with suspended strain relief on the housing
1. Clearly fill out the identification plate with permanent marker.
2. Using one screw, mount the identification plate on the ladder rail di-
rectly above or below the strain relief.
Alternatively:
1. Clearly fill out the identification plate with permanent marker.
2. Using cable ties, fasten the identification plate to the ladder rail, a
cable or a clip.
4 9
Other national requirements
Outside Germany, the country-specific requirements according to the
national construction law must be complied with.
