System instructions OBO isCon
®
EN | 13
Product description
Scope of delivery of the interception rods with internal cable:
– Insulated interception rod with side exit
– Internal connection element (type isCon IN connect)
– Potential connection element (type isCon IN PAE)
– Brief instructions
Scope of delivery of the interception rods with external cable:
– Insulated interception rod with bottom exit
– Brief instructions
3 4
System accessories for fastening
Interception rod stands (see section 3.4.1) or supports for wall or pipe
mounting (see section 3.4.2) can be used to fasten the isCon interception
rods. In addition, the system offers special holders for the isCon cable
(see section 3.4.3).
3 4 1
Interception rod stand
Figure 5:
Interception rod stand with concrete blocks
The isCon system contains folding interception rod stands of different
sizes to allow the isFang interception rods to be mounted on flat roofs, for
example. The tripod interception rod stands allow the erection of the inter-
ception rods without penetrating the building structure with bolts/anchors.
Instead, the interception rod stands are weighed down with FangFix con-
crete blocks. The number of blocks required is dependent on the height of
the interception rod and the wind speed zone. See also „4.6 Installation in
different wind speed zones“ on page 27.
The interception rod stand can compensate a slope in the roof surface of
up to 5° (see also Figure 49 on page 45). To protect the roof surface,
it may be wise to place a protective film under the concrete blocks of the
interception rod stand. We recommend contacting the roofer about this.
Scope of delivery of the interception rod stand:
– Tripod interception rod stand
– Crossbar for potential connection with bolt, nut and lock washer
– Brief instructions
Summary of Contents for isCon 750 LGR
Page 1: ...03 2014 EN isCon System instructions...
Page 65: ...System instructions OBO isCon EN 65 Own notes...
Page 66: ...OBO BETTERMANN 66 EN...
Page 67: ......
