47 | EN
Screw-on cable tray systems
Mounting
Without connector, 400–600 mm cable tray width
T branch pieces with a width of 400 mm or more have connector perfora-
tion. T branch pieces with a side height of 35 or 60 mm are mounted with
RLVK 35/60 straight and angle connectors. T branch pieces with a side
height of 85 or 110 mm are mounted with RLVL 85/110 straight and angle
connectors.
The straight and angle connectors are screwed on with FRS
M6 truss-head bolts and combination nuts.
Fig 54:
T branch piece with RLVL straight and angle connectors and joint plates
Fig 55:
Mounting a T branch piece with RLVL straight and angle connectors
1. With unperforated cut cable trays, pre-drill the connector perforation
for straight and angle connectors and joint plates.
2. Screw the straight and angle connector to the T branch piece.
3. Push the cable trays over the straight and angle connector.
4. Screw on the cable trays.
5. Screw on the joint plates.
