Mounting instructions PYROLINE
®
Rapid fire protection duct
EN | 65
Mounting on a support system
7
Push the threaded rods through.
Screw together the fitting with the supplied nuts and the wall con-
nection plate with threaded rods, nuts and washers in such a way
that the fitting is pressed evenly against the duct and the wall, thus
closing the wall connection tightly.
8
Using the connecting screw (contained in the scope of delivery of the
wall connection), create the equipotential bonding (see “8.1 Create
equipotential bonding” on page 72).
Fig 63:
1.
2.
3.
4.
5.
6.
7.
8.
Mounting a wall connection on a solid wall