User Manual PocketBook Pro 602
13
GETTING STARTED
Step 1. Charging the battery
When you charge your device for the first time keep it charging for 8
– 12 hrs without switching it on. You can charge your PocketBook Pro
602 battery from:
•
a PC via the USB-cable;
•
the mains, using the USB-charger (optional).
When charging the battery for the first time:
1. Make sure the device and its power indicator are off. If it is on,
keep the ‘On/Off’ button pressed for a few seconds.
2. Connect your device to PC/mains via the respective cable.
3. The indicator turns yellow as soon as the charging process
starts.
4. When the battery is fully charged, the indicator turns green or off.
5. Now you can disconnect the device and turn it on for the first
time.
If your device remains active during charging, the PocketBook
screen will display a request to select between charging the battery and
connection for data transmission. Charging will only start after you
select the respective mode.
Step 2. Turning on
To turn the device on keep ‘On/Off’ pressed for about 2 seconds. A
start up logo appears. When the device is ready for operation, the logo
will be replaced with the main menu with recently opened books,
widgets and the main functions of PocketBook Pro 602.
Step 3. Settings
Follow the Wizard instructions to preset the main parameters.
Select required parameters using ‘Up’, ‘Down’, ‘Left’, ‘Right’, and press
‘
ОК
’ to confirm your selection.