18
19
Possibilities of unavailable hand gesture control
1. The target is too far away from Tail when showing the hand gesture, it’s hard for Tail
to identify hand gestures.
2. If the target people do not show hand gestures next to head, it’s hard for Tail to
identify hand gestures.
3. If the target people do not show hand gestures towards Tail, it’s hard for Tail to
identify hand gestures.
4. In the super dim light, it’s hard for Tail to identify hand gestures.
5. If the target is wearing the mask when showing hand gestures, it’s hard for Tail to
identify hand gestures.
6. When the targets are very close to other people, Tail may identify the targets
wrongly so that Tail may initiate the functions to another people rather than the
target people.
7. If the target people show the hand gesture in front of the face and cover the face,
the Power Gesture function can not be initiated.
Please download latest upgrade package on Obsbot’s official website and make sure
SD card has more than 1GB of usable capacity. Unzip the upgrade package and copy
the .bin file to the SD card root directory. Insert the SD card into Tail. Once Tail reads
the SD card, .bin file would restart and upgrade. After completing upgrade, you can
check the upgrade result through the txt file in SD card root directory.
6.3 Using SD Card to Upgrade
Possibilities of unavailable tracking
1. In super dim light, Tail may lose the target to track.
2. When the target is very far away from Tail and the target is very similar to the
crowding environment, it could be hard for Tail to recognize the targets so the
tracking might be unavailable.
3. If the targets have been covered and don’t come back in frame for too long time,
Tail may not be able to track.
4. If the targets are twins, Tail may be confused to track.
5. In Pet Mode, Tail may not be tracking when the pet is jumping suddenly to the total
different direction.
6. When the targets uses mask to cover face, it’s possible for Tail to lose the target.
7. When the targets are too close to Tail and move very fast, Tail may not be able to
track.
8. When other undesired people are very close to Tail and pass in front of the targets,
it’s possible for Tail to lose the target to track.
9. It’s possible for Tail to lose the target when the targets are in too complicated
environments for example walking in the crowd.
7.2 Application Scope Instruction
Please lock the lens of OBSBOT Tail when you transport or carry it to protect lens well.
Please avoid sand, dust and water to avoid physical or internal damage.. Please use
dry and soft wipes to clean the Tail. Do not use any cleaning liquid chemical on Tail.
7.1 Maintenance and Care
7. Appendix
Please make sure that Micro SD card is inserted during upgrade. Micro SD card
should have more than 1GB of usable capacity and the device battery needs to be
more than 50%.
7.3 Specification
General
Gimbal
Camera
Size
Weight (Battery included)
610g
Angular Vibration Range
±0.05°
Assembling method
Non detachable
Controllable Range
Pan: 360° Unlcok Tilt: -55°to+42°; Roll: -45°to+135°
Designed Range
Pan: 360° Unlcok Tilt: -90° to +90°; Roll: -135° to +135°
Max Controllable Speed
180°/s
Power Consumption
10W
Operating Mode
：
167.2*86.7*85.5mm
Shutdown: 185.7*86.7*85.5mm
Camera model
F126S
Sensor
1/2.3'' CMOS SENSOR;Effective pixels:12,400,000
Lens
3.5x Optical Zoom,10x Hybrid Zoom,Equivalent Focal
Length: 21-74mm,Focal Length: 3.85-13.4mm,
F2.4 (wide angle) - F5.0 (long focus)
FOV 92°(wide angle) -32° (long focus)
Electronic Shutter Speed 1/8000-1/30
（
Support long exposure soon
）
ISO Range
Video: 100-6400;Photo: 100-6400
Max Image Size
4000x3000
Still Photography Modes
Single Shot / Burst: 3
，
5
，
7
Continuous shooting / Smart Capture
