16
SECTION 3: DVR SETUP
SECTION 3
DVR Setup
Setting up your DVR includes logging into your DVR, setting the clock, setting administrator and user account passwords, and
setting up scheduled and/or automated motion recording.
NOTE
The following sections provide a generic procedure for setting up a system with a DVR9004N series DVR. If you are setting up an
8- or 16-channel system, the displays you see may be slightly different. For example, if you have an 8-channel DVR, the initial DVR
camera channel display will be an 8-split screen, one split for each channel.
3.1 Login to the DVR
Initially, two access accounts are provided in your system:
Admin
and
user1
. With the
Admin
login, you can make configuration
changes to the system, create user accounts and passwords, and control the privileges allotted to each account. With the factory
default
user1
account login you cannot make configuration changes or create accounts, but can change your own password. The
factory default
Admin
and
user1
account passwords are:
Admin:
888888
user1:
666666
To log into the system:
1. Power on the DVR and wait until it advances to the camera view screen. A typical camera view screen is shown below.
Image from
Channel 1
Camera
NOTE
During initial startup of the system, no password is required.
