Hardware Overview
weather station Package Kits
The Weather station may be ordered using the following kit part numbers. These kits include a number of components that
are listed below, to build a complete weather station.
A89WS-1
weather station with Pyranometer, Temperature, Humidity, and Cell Temperature.
Includes:
A89WS-PY1 Pyranometer kit (Li-cor)
A89WS-TH1 Temperature Humidity kit (Veris)
A89WS-TC1 Cell Temperature kit (Veris)
YWX0482 NEMA 4x control box with 120v power supply, UCLC amplifier, Flex IO, and sensor
connectors.
Does not include mounting kit.
A89WS-2
weather station with Pyranometer, Temperature Only, and Cell Temperature.
Includes:
A89WS-PY1 Pyranometer kit (Li-cor)
A89WS-TO1 Temperature only kit (Veris)
A89WS-TC1 Cell Temperature kit (Veris)
YWX0482 NEMA 4x control box with 120v power supply, UCLC amplifier, Flex IO, and sensor
connectors.
Does not include mounting kit.
A89WS-3
weather station with Pyranometer, Temperature, Humidity, Cell Temperature and Anemometer.
Includes:
A89WS-PY1 Pyranometer kit (Li-cor)
A89WS-AN1 Anemometer kit (NovaLynx)
A89WS-TH1 Temperature Humidity kit (Veris)
A89WS-TC1 Cell Temperature kit (Veris)
YWX0483 NEMA 4x control box with 120v power supply, UCLC amplifier, Anemometer Amplifier,
Flex IO, and sensor connectors.
Does not include mounting kit.
A89WS-4
weather station with Pyranometer, Temperature, Cell Temperature and Anemometer.
Includes:
A89WS-PY1 Pyranometer kit (Li-cor)
A89WS-AN1 Anemometer kit (NovaLynx)
A89WS-TO1 Temperature Only kit (Veris)
A89WS-TC1 Cell Temperature kit (Veris)
YWX0483 NEMA 4x control box with 120v power supply, UCLC amplifier, Anemometer Amplifier,
Flex IO, and sensor connectors.
Does not include mounting kit.
Note: Weather station kits do not include a mounting kit (mast, tripod, etc). If a mounting kit is required, be sure to order
the weather station mounting kit package A89WS-MK1.
Note: The pyranometer kit is intended to be mounted vertically on the weather station. The optional kit A89WS-MP1
should be ordered separately for sites that require the pyranometer to be mounted on the solar panel to match the panel's
angle.
Page 5
Draft Copy
A89WS Weather Station (gen 3)
