Cleaning and Maintenance
30
OC Hot Tubs Owner’s Manual
LTR50001045, Rev. N
Your spa should be drained every four to six months for cleaning and maintenance and refilled with fresh tap water. See
page 32 for instructions on cleaning the shell, cover, and pillows. See page 6 for instructions on refilling your spa. Before
you begin, turn off power to the spa at the breaker and remove all filters.
1. Locate your drain.
Draining Your Portable Spa
3. Connect valve to a garden hose.
Attach a garden hose to the hose-bib fixture. Place the other
end of the garden hose where you would like the water to
drain.
4. Drain the spa.
Turn the valve on the hose-bib fixture to open the drain.
When the spa has drained completely, turn the valve on the
hose-bib fixture, remove garden hose, and replace the cap.
For spas with drain inside the spa
Using a Phillips screwdriver, remove the screws to the
access panel and open it. Locate hose ending with the ¾
inch hose-bib fixture as shown below.
For spas with cabinet-mounted drain
Pull the knob out of the cabinet. The cabinet drain is
screwed into the drain pull knob.
2. Remove the cap.
Make sure the valve is in the closed position, then unscrew and remove the cap. Unscrew the cap.
For spas with drain inside the spa
For all spas
For spas with cabinet-mounted drain
