Cleaning and Maintenance
32
OC Hot Tubs Owner’s Manual
LTR50001045, Rev. N
Vacation Care
Cleaning Your Spa
You can leave your spa unattended for up to two weeks if you follow these instructions.
ALWAYS lock your cover using the cover locks if you plan to be away from home and the spa is filled with
water.
1. Select the Low Range temp choice used for vacation mode. (See instructions on page 12 for vacation setting.)
2. Following the water quality instructions starting on page 18, adjust the pH.
3. Shock the water (add either chlorine or bromine sanitizer).
4. When you return, check and adjust the pH and shock the water.
If you will not be using your spa for longer than 14 days and a spa maintenance service is not available, we strongly
recommend you drain or winterize your spa.
Spa Cover and Pillows
Due to the constant punishment your spa cover and pillows receive, you should protect them by applying a vinyl and
leather cleaner as part of your monthly maintenance plan. Use a product that is specifically designed to protect spa
covers and pillows from chemical and ultraviolet light damage without leaving an oily residue behind that is normally
associated with common automotive vinyl protectants.
Warning:
Do not
use automotive vinyl protectants on spa covers or pillows. These products are generally oil-based
and will cause severe water clarity issues that are difficult to correct.
Spa Shell
Each time you drain your spa, before you refill it you should clean your spa shell with an all-purpose cleaner and apply
a coat of surface protectant.
Use a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its acrylic finish.
Use a non-oil based surface protectant that is specifically formulated to protect the spa’s finish from the chemicals and
minerals associated with normal spa use.