OcÃ© CS230 User Manual Download

Page: 143 / 468

Specifying settings from the control panel

CS230 (Phase3)

4-13

Touch [OK].

Touch [E-Mail Address] and type in the e-mail address using the
keyboard that appears on the screen.

Touch [OK].

Touch [Index] and touch the desired button.

–

This specifies the characters used to index the destination.

–

For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.

–

If the first character of the name is a letter, the first character is
automatically registered as the indexing character.

–

The registration cannot be completed unless settings have been
specified for "Name" and "E-Mail Address".

Touch [OK], and then touch [OK] in the next screen that appears.

The e-mail destination is registered.

Summary of Contents for CS230





















































































































































































































































































































































































































































































Search results

Summary of Contents for CS230

Reviews:

Related manuals for CS230

Brands by name

Popular brands

OcÃ© CS230, User Manual

Search results

Summary of Contents for CS230

Reviews:

Related manuals for CS230

Brands by name

Popular brands