User’s Guide Océ CS9160 printer
Chapter 4 : Handling the printer
81
AP-40790 – Rev 1.0 -4/03/2008,
•
A confirmation pattern for quality adjustment is printed.
•
After the confirmation pattern is printed, the operation panel displays "Adj.1: Confirm".
Step 15 :
Check that the confirmation pattern printing result is as follows.
•
When the printing result is :
You do not to need perform an Alignment.
the procedure for the Alignment is now complete
•
When the printing result is :
You need to perform an Alignment.
Register a setting for Bi-D Normal (two-way printing/normal mode).
Display the Adjust Print menu on the operation panel in the same way as previous steps.
Step 16 :
Press the [+] or [–] key on the operation panel to select "Adj.4: Bi-D Normal".