Océ 3121 – Copying Manual – English
5-4
■
How to Designate Areas for Image-processing
To designate an area on the original, you must designate two opposite corners, the top right and
bottom left corners. These corners are expressed by the coordinates [X1], [Y1] and [X2], [Y2]. Each
of these coordinates are designated in millimeters with the Number keys.
Up to four areas can be designated for Framing, Blanking, Nega/Posi image creation features and
image repeat/mirror image features.
Designate [X1], [X2], [Y1] and [Y2] as follows:
[X1] : Length from the right edge of the original to the
right edge of the area
[X2] : Length from the right edge of the original to the
left edge of the area
[Y1] : Length from the top edge of the original to the top
edge of the area
[Y2] : Length from the top edge of the original to the
bottom edge of the area
NOTICE
●
The maximum values that can be designated for X and Y
are as follows:
X: 432 mm
Y: 297 mm
Designating Areas
Designate the area of the image to be processed as follows.
1
Press the [AREA DESIG.] key.
MEMO
●
For details on operations to carry out from placing the original
until the Special Features screen is displayed, see chapter 4,
”Calling up the Special Features Screen,” on p. 4-3.
2
Designate the area with the [X1], [Y1], [X2] and [Y2]
keys, enter each of the values using the Number
keys, then press the [OK] key.
MEMO
●
[X1] : Length from the right edge of the original to the right edge
of the area
[X2] : Length from the right edge of the original to the left edge
of the area
[Y1] : Length from the top edge of the original to the top edge of
the area
[Y2] : Length from the top edge of the original to the bottom
edge of the area
●
If you enter the wrong values, press the
key and start again.
●
The maximum values that can be designated for X and Y are as
follows:
X: 432 mm
Y: 297 mm
Summary of Contents for 3122
