Oce Arizona 6160 XTS User Manual Download

Page: 9 / 180

Preface

Chapter 1

‐

Introduction

Océ Arizona 6100 Series

•   French
•    Spanish
•   Italian
•    Portuguese
•    Russian
•    Chinese

Océ DGS on the Internet

For further information on documentation and support for your printer or for information on
other Océ Display Graphics Systems products, please visit our web site: http://www.dgs.oce.com

To provide feedback and report errors in this document: dgstechnical.writer@oce.com

Safety Information

This  manual has three sections that contain details on  safety when handling ink  and using the
printer. Also,  where applicable, cautions and warnings are used throughout this  manual to  draw
your attention to  safety precautions.
•    "Safety Guidelines for Ink Materials" offers advice  in the  proper handling of UV inks;
•    "Interlock Safety  System"  explains  the safety features  built  in  to  the printer that prevent and

minimize access to Mechanical, Electrical, Thermal and UV hazards; and

• "UV Curing System Safety" presents warning about the dangers of exposure to UV light. Some

of the material from that section are duplicated here.

Customer Service

If your printer malfunctions and you  are  unable to  resolve the problem, field  service technicians
can be  dispatched to  your site to  conduct repairs. Service visits are paid for by the  customer,
either under a  maintenance agreement,  by  purchase order or  prepayment. Time  and material
rates are  charged for any  service not covered under a  maintenance agreement. Before calling to
report a  problem, gather as much information about the problem as possible and have it ready to
provide to  your customer  care center. The  more information you can provide initially, the more
quickly the problem can be  corrected.

Statement of Foreseen Use

The Océ Arizona flatbed  inkjet  printers are intended for  use in a commercial print shop
environment. Factory-authorized training is  made available for  operators at the  time of
installation. The  printers use piezo printing technology and UV-curable inks to produce outdoor-
durable output. They  can  print directly onto rigid  and flexible media of up  to 50.8mm (2.0  inch)
thickness. The  printer holds the media stationary while the printhead assembly (carriage) moves
across to  create the print, eliminating image  skew problems  often associated  with rigid stock feed
systems.

http://mediaguide.oce.com/

Responsibilities of the Operator

The  printer operator  must  be  properly trained. Océ  provides training for the  operator in the  use of
the printer hardware and  software at the  time of  installation. It is  the  customer's responsibility to
ensure that only  properly trained personnel  operate  the printer. Operators must  be fully versed in
the operation of ONYX Thrive® or  ProductionHouse® . For  any  operator unfamiliar with these
applications, ONYX training is  required. Training courses are available; contact  your  local Océ
representative.