5/25/05
2-3
2
System Requirements
2.1
Receiving and Moving the Arizona
®
T220UV
2.1.1
Receiving the Shipping Crates
The Arizona
®
T220UV is shipped in two separate wooden crates. Due to the delicate
nature of the printer it is essential to have the proper equipment available for handling
and moving the shipping crates. Both crates are equipped with tilt and shock watches. All
equipment must be uncrated by a qualified service engineer.
Crate #1 — with the dimensions shown in Figure 1 — contains the table assembly. The
loaded crates weighs approximately 916 kg (2022 lb). The table assembly rests on
its 6 castors within the crate. Wooden ramps are provided so the table can be
rolled down from the crate to the floor.
Figure 2 Arizona T220UV Table Crate Dimensions.
Warning:
The crates cannot be titled greater than 45 degrees. Once the
machines have been lifted from the crates, they cannot be tilted or
lifted. If there is no loading dock available, crates must be rigged
off the delivery truck (preferably by crane).
112 cm
(3’ 8”)
193 cm (6’ 4”)
443 cm (14’ 7”)
