Environmental Requirements |
5/25/05
2-11
Heat Removal
The lamps that dry the UV ink on printed media on the Arizona T220UV can produce up
to 15,000 BTU per hour (4400 watts). The printer will operate to specification in an
ambient temperature of 20
º
C to 27
º
C (68
º
to 80
º
F). Depending on the print room size
an air conditioning system may be necessary in order to maintain the ambient temperature.
In addition, maintaining a 4
º
C temperature band within the 20
º
C to 27
º
C window is
recommended to ensure consistent printing results from print to print throughout the day.
2.4.2
Shock and Vibration
The Arizona T220UV functions normally in a typical print shop environment. Excessive
vibrations generated from heavy machinery such as shears or punches may affect print
quality and are not considered part of an acceptable operating environment. It may be
necessary to consult a third party to isolate the source of such vibrations.
ODGS recommends that the Arizona T220UV be installed on a stiff, well-supported floor
(a concrete floor is ideal) to minimize transmission of vibration and shock to the machine
from other equipment. A poorly supported floor may transmit shock loads to the machine
from nearby equipment. In some cases, it may be necessary to consult a third party to
recommend building improvements to reduce the effects of shock and vibration.
Packed in its crate, the Arizona T220UV can withstand normal vibrations from road or air
travel. Severe shock, however, may damage the precision components within the machine.
The shipping crate is fitted with shock watches that turn from white to red when their
specified limits have been exceeded. Tamper-proof seals are also added to ensure the crate
has not been opened and the contents interfered with.
2.4.3
Shipping and Storage
These specifications apply to any Arizona T220UV shipped and stored in its own crate.
•
Shipping Temperature: -10
º
C to +50
º
C (-14
º
F to +122
º
F)
•
Storage Temperature: 0
º
C to +35
º
C (32
º
F to +95
º
F)
•
Relative humidity: 10% to 80%
•
Altitude: 0 to 10 668 meters (0 to 35 000 feet)
The machine should not be stored longer than 1 month in an environment with a relative
humidity greater than 60%.
