41
Empty the Trim Bin
Empty the Trim Bin
Introduction
[17]
[17] Trim Bin Open.
[21]
Note:
The Océ BLM500 operates with the trim bin removed for a short time. The
printer waits while the trim bin is removed, then continues when the trim bin is
replaced. To prevent lost production, you must remove, empty and return the trim bin
to the Océ BLM500 as quickly as possible.
When to do
■
An error message is displayed on the touch screen when the trim bin is full.
■
You can empty the trim bin when you choose. For example, before you start a
print job.
Procedure
1.
Use the handle to open the trim bin.
2.
Use the side handles to lift and remove the trim bin.
3.
Empty the trim bin
4.
Fit the bottom of the trim bin over the mounting rail.
5.
Push the trim bin closed at the top.
A
B
A
Trim Bin Side Handle
B
Trim Bin open
Summary of Contents for BLM 500
