5-19
Advanced
Mode
Interleaving Sheets of Paper Between Transparencies
5
Cop
ying b
y
Other Special Methods
Transparency Interleaving
This function enables you to interleave a sheet of copy paper between each
transparency when making a copy onto multiple transparencies.
There are two types of Transparency Interleaving:
Printed Interleaf Sheet: The same image as is on the transparency is copied
onto the interleaf sheet.
Blank Interleaf Sheet:
No copy is made onto the interleaf sheet.
Blank interleaf sheets are not counted as copies.
Interleaving Sheets of Paper Between Transparencies
1
Press the [Sp. Feature] key.
2
Press the [Transparency
Interleaving] key.
3
Select the transparency feeding
location.
The selected key for the feeding location is highlighted.
❚
If no feeding location is displayed
for transparencies on the screen,
it is necessary to register a
transparency feeding location.
For details, see “Transparency
Feed Location,” on p. 13-23.
❚
The stack bypass paper can also be
selected. For details, see “Manual
Feed Copying,” on p. 2-27.
❚
Only registered transparency
feeding locations are displayed.
❚
Press the [Transp. Type] key, and
you can select the type of your
Transparency Projector. For
details, see Steps 4 and 5 in
“When loading transparencies
into a drawer,” on p. 2-36.
1-39
