Oce COLOR SYSTEM 110 Operator'S Manual Download

Page: 131 / 392

6-5

Advanced

Mode

Adjusting Colors

Adjusting Colors and Image Quality

Press the key indicating the color
for saturation adjustment.

To adjust the saturation of all the colors, press the [All]
key.

Adjust the saturation using the
[Low] key and [High] key.

Press the [OK] key.

The [Saturation Adjustment] key is highlighted.

Press the [OK] key.

The display returns to the Sp. Feature screen, and the
[Color Balance] key is highlighted.
The copier is now ready to make copies.

Saturation Adjustment

Summary of Contents for COLOR SYSTEM 110









































































































































































































































































































































































































Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands

Oce COLOR SYSTEM 110, Operator'S Manual

Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands