Oce COLOR SYSTEM 110 Operator'S Manual Download

Page: 140 / 392

6-14

Advanced

Mode

Adjusting Colors

Confirm the settings to be
registered, and then press the
[Yes] key.

The message “Stored in memory.” is displayed, and then
the screen to select the Color Balance settings to be
recalled appears.

Press the [OK] key.

The screen to adjust the Color Balance is displayed.

Press the [OK] key.

The display returns to the Color Balance screen.

Registering/Erasing/Recalling Color Balance

❚

To change the settings to be
registered, press the [No] key.

Summary of Contents for COLOR SYSTEM 110









































































































































































































































































































































































































Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands

Oce COLOR SYSTEM 110, Operator'S Manual

Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands