7-41
Advanced
Mode
7
Designating Colors/Setting Color Creation Mode
Color Creation
Color Conversion
9
Press the [Narrow] key or [Wide]
key to adjust the recognition
range for the color to be
converted.
Narrow: The recognition range for the color to be
converted becomes narrow. If the original has a
similar color tone over an entire area, narrow the
color recognition range.
Wide:
The recognition range for the color to be
converted becomes wide. If many colors with
different color tones are used in the original,
widen the color recognition range to make color
conversion of colors with similar tones.
10
Press the [Low] key or [High] key
to adjust the intensity of the filter
effect.
Low:
To make color conversion for the original
having light color tones, decrease the strength
of the filter effect to prevent blurred colors.
High:
To make color conversion for the original
having clear gradations, increase the strength
of the filter effect to produce a smooth image
with color roughness suppressed.
11
Press the [OK] key.
The [Fine] key is highlighted on the screen for selecting
whether to apply gradation to the color after the color
conversion.
