Oce COLOR SYSTEM 110 Operator'S Manual Download

Page: 276 / 392

11-9

Inser

ting T

xt/Images

Advanced

Mode

Inserting Text

Press the [Superimpose] key, and
then the [Next] key.

Set the Text Editing.

Color for Text, Contour, and Shadow can be set for the
text to be inserted.

Press the [Next] key.

Press the [ ] or [ ] key to
specify the mixing ratio at which
the background color original is
reproduced.

❚

For details on the respective Text
Editing functions, see the
following pages:
• Making Copies with Specified

Colors for Text (p. 8-12)

• Making Copies Using Only the

Contours (p. 8-14)

• Making Copies with Shadows

Added to Text (p. 8-17)

• Making Copies with only the

shadows of the Text (p. 8-17)

Character Composition

Summary of Contents for COLOR SYSTEM 110









































































































































































































































































































































































































Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands

Oce COLOR SYSTEM 110, Operator'S Manual

Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands