13-3
Mode Memory/Recall/
Additional Functions
13
Additional Functions
Setting Items in Additional Functions Mode
Additional Functions Setting List
Item and Description
Set System Settings Password
Register or change the system settings
password.
Dept. ID Management
Register the department ID number and
the password number or display/delete
the copy counts for each department.
Initialize Custom Settings
Restore the changed custom settings to
the factory preset initial values.
Auto Clear Time
Set the Auto Clear Time.
Auto Energy Saver Time
Set the Auto Energy Saver Time.
Auto Power-Off Time
Set the Auto Power-OFF Time.
Zoom Fine Adjustment
Adjust the copy ratio error.
Expo. Recal.
Correct the standard value of copy
exposure.
Grad. A Adjst
Perform to automatically adjust
gradations.
Text/Photo Priority
Adjust the text and photo priority level
control.
Feeder Cleaning
Select to clean the original feeder rollers
of the optional Feeder.
Wire Cleaning
Select to clean the primary corona
assembly wire.
Print Gradation Adjustment
Set to ON to produce smooth color
gradations of the image output via the
PS controller (PS-ZX Series).
SWOP Emulation
Adjust the color settings to output the
image to more closely match the hues
produced in the offset printing.
Original Type Selection for Printer
Set to ON to change the resolution of
the image output via the PS controller.
Setting Value
(*Factory preset initial setting)
*No setting
On
*Off
None
1 to 9 min.
*2 min.
None
1 min. to 8 hrs.
*30 min.
No settings
1 to 4 hrs.
*1 hour
X: -1.0 ~ +1.0 / Y: -1.0 ~ +1.0
*X.Y: 0.0
-2 ~ +2
*0
*On
Off
On
*Off
*Photo
Auto
Text
Refer to
13-37
13-40
13-46
13-48
13-50
13-52
13-54
13-56
13-58
13-61
13-62
13-64
13-66
13-68
13-70
Custom Settings
Timer Settings
Adjustment/Cleaning
