Oce COLOR SYSTEM 110 Operator'S Manual Download

Page: 367 / 392

13-59

Mode Memory/Recall/

Additional Functions

Adjustment/Cleaning

Additional Functions

Place the output Test Print 1 on
the platen glass.

Position the Test Print 1 so that the black band is located
on the far side of the platen glass and the printed side is
face down.

Press the [Scan] key.

Press the [Test Print 2] key.

The message “Printing Test Print 2” is displayed, and the
Test Print 2 is output.

Place the output Test Print 2 on
the platen glass.

Position the Test Print 2 so that the yellow band is located
on the far side of the plate glass and the printed side is
face down.

Automatic Gradation Adjustment

Summary of Contents for COLOR SYSTEM 110









































































































































































































































































































































































































Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands

Oce COLOR SYSTEM 110, Operator'S Manual

Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands